COBAguard

Self-adhesive floor protection film with hard floor and carpet options

  • Adaptable floor protection film for maintenance and show houses etc, to keep floors clean.
  • Film is reverse wound on the roll for rapid installation, saving you time.
  • Can be installed by hand for smaller rooms / staircases or with an applicator for larger areas.
  • Does not leave marks or residues – no cleaning required after use.
  • Self-adhesive polyethylene protection film.
  • Can be branded with your logo upon request.
  • Parts
  • Technical Specification
  • Downloads

Parts

Part NumberSizeColourWeight
CGC000010.6 m x 25 mCarpet1.50 kg
CGH000010.6 m x 25 mHard floor1.00 kg
CGH000021.2 m x 25 mHard floor2.00 kg
CGC000021.2 m x 25 mCarpet2.65 kg
CGH000030.6 m x 50 mHard floor2.00 kg
CGC000030.6 m x 50 m rollCarpet2.75 kg
CGH000041.2 m x 50 mHard floor6.00 kg
CGC000041.2 m x 50 mCarpet5.20 kg
CGH000050.6 m x 100 mHard floor4.00 kg
CGC000050.6 m x 100 mCarpet4.90 kg
CGH000061.2 m x 100 mHard floor8.00 kg
CGC000061.2 m x 100 mCarpet12.00 kg

Technical Specification

MaterialPE (LDPE and LLDPE) film
Surface FinishSmooth
Product Height50-90 microns
Operating Temperature+60°C 160 hours
Environmental ResistanceSuitable for indoor environments
Typical ApplicationsTemporary protection of carpets and hard floors
Country of OriginChina
Storage and applicationThe product should be protected against direct sunlight and extremes in temperature and humidity and stored upright in its original packaging. The film should be applied within a 3 month period from the delivery date. The film should be removed within 30 days from the date of lamination. Surface preparation is important. The substrate should be clean and free from residue, such as dust and oil, when the tape is applied in order to achieve optimum adhesion. Do not press too hard when applying. This may cause the end of the tape to peel. If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
Adhesion Strength1-2kg/50 mm
Tensile Strength≥45 N/mm
Elongation≥300%
Application TemperatureCold temperatures can affect the peel strength. Please apply the film at room temperature (+10°C to +30°C).

Downloads

Datasheet

Literature

We offers a range of sales and marketing support materials. Select from any of the items below to start downloading.

Our floor protection film is ideal for use on hard floors or carpets, and mainly used for floor protection and maintenance. Show houses often use floor protection film on carpets, due to being self-adhesive and easy to install. Installation can be done by hand or an applicator for larger areas. See our full range of Flooring.