Bubblemat Anti Fatigue Mat

Smart anti-fatigue mat with a distinctive bubbled surface

Fatigue Rating
Slip Rating
Wear Rating
Oil Resistant
  • Raised bubble patterned surface stimulates feet and legs to aid circulation.
  • Underfoot cushioning also makes prolonged occupational standing more comfortable.
  • A choice of materials depending on the demands of the environment (dry use only).
  • Complete mats suitable for workstations and interlocking sections available for longer production lines.

Styles Available

Bubblemat Workplace Matting Styles Black Standard
Bubblemat Workplace Matting Styles Safety Safety
  • Parts
  • Technical Specification
  • Downloads


Part NumberSizeColourWeight
BF0100010.6 m x 0.9 m (edged all round)Black6.35 kg
BF0100020.9 m x 1.2 m (edged all round)Black10.50 kg
BF0100030.6 m x 0.9 m (interlocking end piece)Black6.35 kg
BF0100040.6 m x 0.9 m (interlocking middle piece)Black6.35 kg
BF010001N0.6 m x 0.9 m (edged all round)Black (Nitrile)5.00 kg
BF010002N0.9 m x 1.2 m (edged all round)Black (Nitrile)11.00 kg
BF010003N0.6 m x 0.9 m (interlocking end piece)Black (Nitrile)5.00 kg
BF010004N0.6 m x 0.9 m (interlocking middle piece)Black (Nitrile)5.00 kg
BF0107010.6 m x 0.9 m (edged all round)Safety5.00 kg
BF0107020.9 m x 1.2 m (edged all round)Safety11.00 kg
BF0107030.6 m x 0.9 m (interlocking end piece)Safety5.00 kg
BF0107040.6 m x 0.9 m (interlocking middle piece)Safety11.00 kg
BF0107050.9 m x 1.2 m (interlocking end piece)Safety11.00 kg
BF010706 0.9 m x 1.2 m (interlocking middle piece)Safety11.00 kg

Technical Specification

MaterialStandard - Natural rubber. Nitrile version - NBR.
Surface FinishBubble
Product Height14 mm
Product Weight10kg
Operating Temperature-20°C to +50°C
Resistance to ChemicalsNot resistant to fat and mineral oil
Environmental ResistanceSuitable for predominantly dry environments
UV ResistanceYes
Typical ApplicationsGeneral industrial
Installation MethodLoose lay interlocking mats
Cleaning MethodUse a high pressure hose (not exceeding 60psi) to remove the dirt and debris on the mats. For best results use a mild detergent (pH 4.0-9.0) to clean the mats. Do not use steam or degreasers or caustic chemicals. Do not mechanically scrub the mats
Country of OriginSri Lanka
Storage and applicationMat should be covered by polythene
Tensile Strength3 MPa
Application Temperature-30°C to 50°C
Manufacturing processCompression moulding