Commercial Black Rubber From
£5.99 exc. VAT
£7.04 inc. VAT

• General purpose grade for water service and dilute chemicals
• Low cost waterproof seals, gaskets

Technical Specifications:

• 68 degrees shore A hardness
• Tensile strength at break: 3.0 Mpa
• Elongation at break: 200%
• Roll Length: 10m (for thicknesses 1.5mm to 6mm), 5m (for thicknesses 8mm and above)

Insertion Black Rubber From
£8.99 exc. VAT
£10.56 inc. VAT

• Similar properties to standard commercial but embedded textile reinforcement offers increased tensile strength and tear resistance

Technical Specifications:

• 68 degrees shore A hardness
• Tensile strength at break: 3.0 Mpa
• Elongation at break: 200%
• Roll Length: 10m (for thicknesses 1.5mm to 6mm), 5m (for thicknesses 8mm and above)

Food Quality White Rubber Sheet From
£14.99 exc. VAT
£17.61 inc. VAT

• White, non-marking rubber manufactured using FDA approved ingredients
• Use in all food and beverage industries or sealing applications

Technical Specifications:

• Avoid vegetable/animal oils (nitrile available)
• 62 degrees shore A hardness
• Tensile strength at break: 4 Mpa
• Elongation at break: 300%
• Roll Length: 10m (for thicknesses 1.5mm to 6mm), 5m (for thicknesses 8mm and above)

Black EPDM Rubber From
£11.99 exc. VAT
£14.09 inc. VAT

• EPDM RUBBER is ideal for outdoor applications because of its excellent resistance to ozone, oxidants, and severe weather conditions

Technical Specifications:

• 67 degrees shore A hardness
• Tensile strength at break: 5 Mpa
• Elongation at break: 300%
• Roll Length: 10m (for thicknesses 1.5mm to 6mm), 5m (for thicknesses 8mm and above)

Commercial Black Nitrile Rubber From
£11.99 exc. VAT
£14.09 inc. VAT

• Excellent, resistance to oils, fuels, petroleum, most solvents
• Good abrasion resistance

Technical Specifications:

• 62 degrees shore A hardness
• Tensile strength at break: 5 Mpa
• Elongation at break: 200%
• Roll Length: 10m (for thicknesses 1.5mm to 6mm), 5m (for thicknesses 8mm and above)

Commercial Black Neoprene Rubber From
£11.99 exc. VAT
£14.09 inc. VAT

• Good resistance to mineral oils, greases, dilute acids and alkalis
• Good ageing and weathering properties make it suitable for outdoor applications

Technical Specifications:

• 65 degrees shore A hardness
• Tensile strength at break: 6 Mpa
• Elongation at break: 250%
• Roll Length: 10m (for thicknesses 1.5mm to 6mm), 5m (for thicknesses 8mm and above)

Shotblast Rubber From
£44.99 exc. VAT
£52.86 inc. VAT

• A cost-effective, abrasion-resistant rubber

Technical Specifications:

• 62 degrees shore A hardness
• Tensile strength at break: 10 Mpa
• Elongation at break: 350%
• Roll Length: 10m (for thicknesses 1.5mm to 6mm), 5m (for thicknesses 8mm and above)

Para Shotblast Rubber From
£72.49 exc. VAT
£85.18 inc. VAT

• Tan coloured natural rubber
• Outstanding resistance to wear and abrasion - used as protective screening in shotblasting applications but also used in strip or gasket form where durability is essential

Technical Specifications:

• 45 degrees shore A hardness
• Tensile strength at break: 15 Mpa
• Elongation at break: 400%
• Roll Length: 10m (for thicknesses 1.5mm to 6mm), 5m (for thicknesses 8mm and above)